AT8-ATI-2

1. TECHNICAL DATA _______________________________________________________________________________ AT8 Lane Marking Tape Version 1 8 General Des cription A heavy duty plasticised PVC film coated with a n aggressive cross – linked solvent based rubber – resin adhesive.  Excellent conformability, particularly to uneven surfaces  Specially formulated PVC prevents lifting  Water resistant  Good abrasion resistance  UV resistant  Very aggressive, non-corrosive adhesive  Can be walked on immediately after application  Suitable for indoor and outdoor use  Can be applied by hand or machine  Colours and widths in accordance with the Sports England Guidance Notes Te chnical Details Typical Values Tape Thickness 0.14mm Breaking Load 26 N/cm Elongation at Break 150% Adhesion Steel 3.5 N/cm Self 2.5 N/cm Water Extract pH 6.0 to 8.0 Conductivity Max 2.5 mS/m RoHS Compliant Yes Service Temperature 0°C to +60°C Application Temperature +5°C to +40°C Storage Temperature +12°C to +25°C NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re - issue of the relevant ‘Technica l Data Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place. AFERA Association des Fabricants Européens de Rubans Auto - Adhésifs.