Fire-Grip-3.0-User-instructions-confirmed-for-print-V1-A5VE-Single

1. USER INSTRUCTIONS GRANQVISTS ® FIRE GRIP – BA09 01 (V1) ENGLISH GRANQVIST SPORTARTIKLAR AB Hynboholm 342, 655 91 Karlstad, Sweden Phone +46 54 53 21 00 info@granqvists.se | order@granqvists.se | www.granqvists.se FIRE GRIP 3.0 – BA09 01 EN 420:2003+A1:2009 (Gloves general requirements) EN 659:2003+A1:2008 (Protective gloves for firefighters) EN 407:2004 (Protective Gloves against Thermal risks, heat and/or fire) EN 388:201 6 +A1:20 1 8 (Protective Gloves agains t mechanical risks) SIZE RANGE (EU) 6, 7, 8, 9, 10, 11 MATERIALS: Shell: Split cow leather | Fourchettes: Roe deer | Liner: Carbon fibers / Kevlar ® | Thread: Nomex ® | Membrane: Porelle ® CERTIFICATION: Product satisfies the applicable essential safety requirements of the Regulation (EU)2016/425. This is PPE of category III, it is subjected to regular checks in accordance Module C2. The EU type examination certificate according to Module B and Module C2 is performed by: Centexbel (NB 0493) Technologiepark 70, 9052 Zwijnaarde, Belgium | Certificate Number 046/202 1 / 0085 DECLARATION OF CONFORMITY (DOC) – V isit : https://granqvists.se/conformity/ INSTRUCTIONS FOR USE – CATEGORY III Intended use: Gloves need to be used according to their designed purpose which is extinguishing fires. In other situations, the product will not guarantee high level of protection which can lead to a compromised product and personal injuries Storage and transport: K e ep away from direct sunlight, store in a cool and dry place and keep in original packaging. Inspection before use: Before every action inspection must be performed in order to check if there is any visible damage. Never use a damaged product Care and mai ntenance : FIRE GRIP 3.0 - BA09 01 is EN - 659 certified after 25 mechanical washes. Disposal: According to local environmental legislations. Noncompliance: Inappropriate use of the gloves can lead to serious injury and noncompliance with these instructions for use will release manufacturer from all responsibilities. Warranty for end user: 2 years The Performance levels claimed for the gloves are based on th e test performed on the palm area of the gloves. For gloves with two or more layers, these overall performance levels of EN 388 : 2016+A1:2018 may not necessarily reflect the performance of the glove’s outermost layer. Do not use this glove near moving elem ents or machinery with unprotected parts. DULLING OCCURS for the cut resistance test (6.2), the coupe - tests results are only indicative while the T D M cut resistance test (6.3) is the reference performance result. MANUFACTURED IN POLAND

2. USER INSTRUCTIONS GRANQVISTS ® FIRE GRIP – BA09 01 (V1) PERFORMANCE LEVELS FOR EN 388:2016+A1:2018 - PROTECTIVE GLOVES AGAINST MECHANICAL RISKS ( Protection levels are measured from area of glove palm ) A. Abrasion resistance B. Blade cut resistance C. Tear resistance D. Puncture resistance E. Cut Resistance TD M (EN ISO 13997) F. Impact Protection MIN MAX RESULT Abrasion resistance EN 388 6.1 3 4 4 Cut resistance EN 388 6.2 2 5 4 Tear resistance EN 388 6.4 3 4 4 Puncture resistance EN 388 6.5 3 4 4 Cut resistance ISO 13997 6.3 A F F Impact Test EN 13594:2015 §6.9 PASS X PERFORMANCE LEVELS FOR EN 407:2004 - PROTECTIVE GLOVES AGAINST THERMAL RISKS (Heat and/or fire) A. Burning behaviour B. Contact heat C. Convective heat D. Radiant heat E. Small splashes of molten metal F. Large splashes of molten metal MIN MAX RESULT Burning behaviour EN ISO 6941 1 4 4 Contact heat EN 702 1 4 2 Convection heat ISO 9151 1 4 4 Radiant heat EN ISO 6942:2002 method B 1 4 2 Small drops of molten metal EN 348 1 4 X Large quanties of molten metal EN 373 1 4 X PERFORMANCE LEVELS FOR EN 659:2003+A1:2008 - PROTECTIVE GLOVES AGAINST THERMAL RISKS REQUIREMENTS RESULT Convection heat EN 367 HTI24 ≥1 3 (level 3) PASS Contact heat EN 702 250°C t t ≥ 10 PASS Resistance to liquid chemical penetration EN ISO 6530 No penetration PASS Burning behaviour EN 407 Afterburn ≤ 2s afterglow ≤ 5s PASS Radiant heat EN ISO 6942 t24 ≥ 20s PASS Abrasion EN 388 6.1 At least level 3 (2000t) PASS Cut resistance EN 388 6.2 At least level 2 PASS Tear resistance EN 388 6.3 At least level 3 (50N) PASS Puncture resistance EN 388 6.4 At least class 3 (100N) PASS Size EN 420 PASS Removal of the gloves EN 659 3.15 < 3s PASS D exterity EN 420 At least level 1 PASS Whole glove integrity test ISO 15383 No leaks PASS Seam strenght EN ISO 13935 - 2 > 350N PASS Heat shrink ISO 17493 Shrinkage ≤ 5% PASS Resistance to water penetration (optional) EN 20811 N/A