TDS_BLS600next_FLAT_DISPOSABLE

3. BLS 600 SERIES THREE-FLAP FLAT FILTERING FACEPIECES BLS SRL via dei Giovi, 41 20032 Cormano (MI) - Italy t/f +39 0239310212 / 0266200473 info@blsgroup.it - www.blsgroup.com TDS-BLS600next-DISPOSABLE-FLAT-EN BLS filtering facepieces are: • Certified according to European Regulation 2016/425 (Personal Protective Equipments) • Certified as PPE of III category, in presumption of conformity to harmonized standard EN 149:2001+A1:2009 • Certified and controlled according to Annex D by Italcert S.r. l. (Notified Body n°0426) • CE marked BLS management system is ISO 9001 certified. P 3/3 BLS declines any responsibility, direct or indirect, from any misuse of both devices and instructions. User is responsible for the determ nation of product compliance with the intended use. AVAILABLE MODELS CERTIFICATIONS DONNING INSTRUCTIONS IMPORTANT CHECK FIT Put your hands on the mask and exhale sharply (unvalved mask); inhale sharply (valved mask). If you perceive there is air lea kage between the mask and your face you need to readjust the nosebri dge and the elastics. Repeate the adjustment until you achieve a proper fit. NOTE: it is unlikely to achieve a proper fit in case of people w ith beard BLS 670 Size M/L - Size S BLS 680 Size M/L - Size S

2. BLS 600 SERIES THREE-FLAP FLAT FILTERING FACEPIECES BLS SRL via dei Giovi, 41 20032 Cormano (MI) - Italy t/f +39 0239310212 / 0266200473 info@blsgroup.it - www.blsgroup.com TDS-BLS600next-DISPOSABLE-FLAT-EN P 2/3 MATERIALS ELASTICS Polyester (PES) and synthetic rubber NOSE CLIP Polypropylene (PP) reinforced with heat-treated metal VALVE Polypropylene (PP); synthetic rubber GASKET Polyethylene foam (PE) FILTERING MATERIAL Polypropylene (PP) All components in direct contact with user’s face are LATEX FRE E BLS 600next filtering facepieces are Made in Europe, just as all of their components. PRODUCT CODE SIZE CLASS of PROTECTION NPF SINGLE PACK VALVE ELASTICS GASKET BLS 670next 8101026 S FFP2 NR D 12*TLV Rubber BLS 670next 8101022 M/L FFP2 NR D 12*TLV Rubber BLS 680next 8101028 S FFP2 NR D 12*TLV Rubber BLS 680next 8101027 M/L FFP2 NR D 12*TLV Rubber (NR) Non-reusable, maximum 8 hours (R) Reusable (TLV) Threshold Limit Value (NPF) Nominal protective factor (D) Product passed clogging test with Dolomite dust, simulates high concentration of solid particles TECHNICAL DATA PRODUCT CODE SIZE WEIGHT (g) Q.TY/BOX Q.TY/CARTON CARTON WEIGHT (Kg) Q.TY/PALLET BLS 670next 8101026 S 12 16 96 2.2 kg 3072 BLS 670next 8101022 M/L 12 16 96 2.2 kg 3072 BLS 680next 8101028 S 16 10 60 2.0 kg 1920 BLS 680next 8101027 M/L 16 10 60 2.0 Kg 1920 TRANSPORT FIELD OF USE Protection against dusts/fumes/aerosols of average toxicity particles in concentrations up to 12 x TLV (NPF) . Ex. constructions, cement manufacturing, foundries, grinding, sanding, dust painting, fiberglass cutting, wood (not hard wood), food industry. In addi - tion, 670next being an FFP2NRD without valve is the appropriate solution to reduce the possibility of contagion from virus/bacteria, so it can be used in medical applications as well.. LIMITATIONS OF USE Do not use this mask when: • Oxygen concentration is < 17% • The contaminants are unknown or are in concentrations exceeding the NPF • Gases/vapour are present STORAGE SHELF-LIFE 10 years TEMPERATURE +5°C/+40°C RELATIVE HUMIDITY <60%

1. BLS 600 SERIES THREE-FLAP FLAT FILTERING FACEPIECES BLS SRL via dei Giovi, 41 20032 Cormano (MI) - Italy t/f +39 0239310212 / 0266200473 info@blsgroup.it - www.blsgroup.com TDS-BLS600next-DISPOSABLE-FLAT-EN P 1/3 BLS 600next filtering facepieces can be used to protect the user from solid and/or liquid nonvolatile particles up to 12* times the Threshold Limit Value (TLV-TWA). Elastics harness attached at four points, internal nose clip and seal ensure an excellent fit for most physiognomies. The dual size is designed to achieve the best fit-testing results. Thanks to the three-flap design, the device adapts perfectly to all facial movements, ensuring maximum protection and efficiency at all times. The folded lower flap allows easy opening of the facepie - ce without contaminating the inside. THREE-FLAP FLAT DESIGN Low respiratory resistance exhalation valve, which allows hot hu - mid exhaled air to escape more easily and ensures high comfort for the user, making the filtering facepiece suitable for hot humid work environments. AVAILABLE WITH EXHALATION VALVE INTERNAL NOSE CLIP The internal nose clip, placed between the layers of filter material, adapts optimally to the profile of the nose and eyes, guaranteeing good visibility and maximum compatibility with glasses. This series is available in two different sizes, M/L and S, to perfect - ly fit all face profiles. AVAILABLE IN TWO SIZES RUBBER ELASTICS The rubber elastics are made of hypoallergenic latex-free material. The addition of a supporting layer allows the elastics to adhere to the filter body without the use of exposed metal parts. The addition of an innovative inner core provides solidity to the filtering facepiece and high breathability, while maintaining low breathing resistance. RIGID INNER CORE Each mask is packed in an individually sealed PE pouch, to max - imize hygiene. It is also the best solution to carry the mask in a pocket, or have it available in vending machines. SINGLE PACKED The shape of the filtering facepiece guarantees a large filtering surface area, leaving the field of vision totally free. OPTIMAL VISUAL FIELD Nose gasket in soft polyethylene foam to increase comfort and fit. NOSE GASKET S -15% M/L